|
Scaleauto SC-7061 'Total' Audi R8 LMS #73
WRT Belgian Audi Club entered three cars for the 2010 24 Hours of Spa. Car #73 with drivers Stéphane Ortelli, Stéphane Lémeret, Kurt Mollekens and François Verbist finished thirteenth overall.
Speciifications are subject to chasnge
Motor SC-0026
Motor mount front SC-8114b rear SC-8115b
Axle carrier front SC-8108b rear SC-8108d
Axles SC-1242 3x70mm
Ball bearings SC-1331
Wheels front SC-4042rear SC-4043
Tires front SC-4716 rear SC-4717
Chassis plate SC-8128
H-plate SC-8101
H-plate mounting nuts SC-8126A
Front subframe SC-8103
Body mounts SC-8124 Audi R8 LMS specific
Body mounts SC-8107 used on all Scaleauto 1/24 scale cars
Guide SC-1622
Braid SC-1614
Guide nut SC-5116
Guide holder SC-8104
Pinion SC-1012 12t
Spur SC-1056b 44t
Listing of useful parts for the 1/24 Scaleauto cars
Medium compound rubber rear tires SC-4737
Soft compound rubber rear tires SC-4736
Glued & trued sponge front tires on lightweight aluminum wheels SC-2715P these wheels can easily be fitted with the stock wheel inserts
Glued & trued sponge rear tires on lightweight sluminum wheels SC-2121p(supersoft), SC-2621p(soft), SC-2421p (medium), SC-2521P (hard) these wheels can easily be fitted with the stock wheel inserts
Guide spacer SC-1623 As stock on the 1/24 scale cars the guide is set for NINCO track with it's raised rails, if you will be running on Carrera or a routed wood track then you will find you need to shim the guide down to get fully in the slot. Or, and this is what we recommend, you can shift the guide from it's position atop the chassis plate to the bottom of the chassis plate, this is easily done as just four small screws hold the guide holder in place. If you choose to shift the guide carrier below the chassis plate then you will also want SC-1626 guide, this guide is a 'low profile' version of the stock guide.
 |
