|
Scaleauto SC-7036 BMW M3 GT2 #56, LeMans 2011
Andy Priaulx / Joey Hand / Dirk Muller drove in the 2011 Le Mans race
to a 3rd place finish in GT Pro.
Stock parts list:
Motor: SC-0026 26,000 rpm and 310 g/cm torque @ 12volts
Ball bearings: SC-1331 Steel ball bearing 6mm x 3mm. Flanged
Guide: SC-1622 Scaleauto Heavy Duty Pro Guide
Pinion: SC-1006 A/O 12T Nylon Pinion
Spur: SC-1056b Nylon Spur Gear 44t.
Axle carrier front: SC-8108b Axle holder 8mm height.
Axle carrier rear: SC-8108d Axle holder 10mm height
Wheels front: SC-4042
Tires front: SC-4716
Wheels rear: SC-4043
Tires rear: SC-4717
Listing of useful parts for the 1/24 Scaleauto cars
Medium compound rubber rear tires SC-4737
Soft compound rubber rear tires SC-4736
Glued & trued sponge front tires on lightweight aluminum wheels SC-2715P these wheels can easily be fitted with the stock wheel inserts
Glued & trued sponge rear tires on lightweight sluminum wheels SC-2121p(supersoft), SC-2621p(soft), SC-2421p (medium), SC-2521P (hard) these wheels can easily be fitted with the stock wheel inserts
Guide spacer SC-1623 As stock on the 1/24 scale cars the guide is set for NINCO track with it's raised rails, if you will be running on Carrera or a routed wood track then you will find you need to shim the guide down to get fully in the slot. Or, and this is what we recommend, you can shift the guide from it's position atop the chassis plate to the bottom of the chassis plate, this is easily done as just four small screws hold the guide holder in place. If you choose to shift the guide carrier below the chassis plate then you will also want SC-1626 guide, this guide is a 'low profile' version of the stock guide.
|
