SC-7049 Porsche 911 RSR #25, Super GT 2011

Scaleauto SC-7049  Porsche 911 RSR #25, Super GT 2011 

For the 2011 Super GT SAMURAI Team TSUCHIYA entered this car in the GT300 class for

drivers Akihiro Tsuzuki and Takeshi Tsuchiya. 

Stock parts:

Motor  SC-0026  Scaleauto Long Can Endurance Motor 22,000rpm with 310 gr/cm torque at 12 volts

Axle carrier front SC-8108b 

Axle carrier rear SC-8108d

Ball bearings SC-1331

Wheels front  SC-4042 

Wheels rear SC-4043 

Tires front SC-4716

Tires rear  SC-4717

Guide SC-1622

Listing of useful parts for the 1/24 Scaleauto cars
Medium compound rubber rear tires SC-4737 
Soft compound rubber rear tires SC-4736 
Glued & trued sponge front tires on lightweight aluminum wheels SC-2715P these wheels can easily be fitted with the stock wheel inserts
Glued & trued sponge rear tires on lightweight sluminum wheels SC-2121p(supersoft), SC-2621p(soft), SC-2421p (medium), SC-2521P (hard) these wheels can easily be fitted with the stock wheel inserts
Guide spacer SC-1623  As stock on the 1/24 scale cars the guide is set for NINCO track with it's raised rails, if you will be running on Carrera or a routed wood track then you will find you need to shim the guide down to get fully in the slot. Or, and this is what we recommend, you can shift the guide from it's position atop the chassis plate to the bottom of the chassis plate, this is easily done as just four small screws hold the guide holder in place. If you choose to shift the guide carrier below the chassis plate then you will also want SC-1626 guide, this guide is a 'low profile' version of the stock guide.